5 Micron PP Sediment Filter Cartridge – 10" x 4.5" Big Blue Polypropylene Water Filter
Referencia : REC1045PP05
5 micron polypropylene (PP) sediment filter cartridge designed for water filtration systems using 10" x 4.5" Big Blue filter housings. Helps remove suspended particles such as sand, rust, dirt and sediment, protecting pipework and downstream water treatment equipment.
✓ 5 micron sediment filtration
✓ Made from polypropylene (PP)
✓ Standard 10" x 4.5" Big Blue size
✓ Helps reduce sand, rust, dirt and suspended particles
✓ Compatible with suitable ROTEK FILTERS housings and ROBIG water filtration systems
Dimensions: 254 mm height x 112 mm outside diameter.
Precio : £ 11.95 £ 23.90
Más información
5 Micron Polypropylene Sediment Filter Cartridge
Effective sediment filtration for domestic, commercial and professional water installations. Standard 10" x 4.5" Big Blue format.
Effective Sediment Filtration
The 10 micron polypropylene (PP) sediment filter cartridge is designed to reduce suspended solid particles in water, including sand, rust particles, dirt, mineral deposits and other sediment.
Its polypropylene filter media provides mechanical filtration by retaining particles as water passes through the cartridge. This helps improve water clarity and reduce sediment accumulation within water installations.
It is an ideal solution for water pre-filtration, helping protect pipework, valves, filtration systems and downstream water treatment equipment.
Thanks to its standard 10" x 4.5" Big Blue format, the cartridge can be installed in compatible ROTEK FILTERS filter housings and ROBIG water filtration systems using cartridges of equivalent dimensions.
Key Benefits of Polypropylene Filtration
Designed to retain suspended solids and sediment particles according to its specified filtration rating.
Polypropylene filter media designed for mechanical particle filtration in water treatment systems.
Helps reduce sediment reaching downstream equipment and water treatment installations.
Suitable for compatible filter housings designed for 10" x 4.5" cartridges.
Recommended Applications
This cartridge is particularly suitable for sediment pre-filtration in water installations where suspended solid particles need to be reduced.
✓ General water pre-filtration.
✓ Protection of water treatment equipment.
✓ Removal of sand and mineral particles.
✓ Reduction of rust particles from pipework.
✓ Domestic, commercial and professional water installations.
Technical Specifications
| Cartridge Type | PP sediment filter |
| Filtration Rating | 5 microns (5 µm) |
| Cartridge Size | Big Blue 10" x 4.5" |
| Height | 254 mm |
| Outside Diameter | 112 mm |
| Inside Diameter | 27 mm |
| Filter Material | Polypropylene (PP) |
| Colour | White |
| Application | Sediment filtration |
Compatibility and Installation
This cartridge is designed for filter housings that accept 10" x 4.5" cartridges, commonly referred to as Big Blue housings.
It can be used as a replacement cartridge in compatible ROTEK FILTERS housings and ROBIG filtration systems using cartridges of equivalent dimensions.
Before replacing the cartridge, check the dimensions of the original filter and its compatibility with the housing. Turn off the water supply and release system pressure before opening the filter housing.
Maintenance and Replacement
Replacement frequency depends on water quality, sediment concentration and the volume of water filtered.
The cartridge should be checked periodically and replaced when a significant reduction in water flow or an increase in pressure drop is observed, following the manufacturer's recommendations.
This cartridge is designed for the mechanical filtration of suspended sediment particles. It does not remove dissolved salts or disinfect water. On its own, it cannot make unsafe water suitable for drinking.
Ficha técnica
| Model | Water Filter |
| Compatible Model | Universal |