ROTEK 10” Dual Anti-Scale Water Filter – 50 Micron Sediment + Polyphosphate | 1”
Referencia : KITFILTD1SPOL
ROTEK FILTERS 10” dual anti-scale water filtration system combining two treatment stages to help protect pipework, fittings and water-connected equipment.
Stage 1: 50 micron polypropylene (PP) string wound sediment cartridge to retain sand, rust and suspended particles.
Stage 2: polyphosphate anti-scale cartridge to help reduce the formation of limescale deposits in pipework, fittings and equipment.
Features 1” brass connections, reinforced PP + PET double-layer construction, inspection windows and universal 10” cartridges. Supplied with both cartridges, wall mounting bracket and housing wrench.
Precio : £ 64.99 £ 129.98
Más información
ROTEK FILTERS
TWO-STAGE FILTRATION & ANTI-SCALE PROTECTION
50 Micron Sediment + Polyphosphate
The ROTEK FILTERS 10-inch dual water filter combines two complementary treatment stages to help protect water installations and connected equipment.
The first stage uses a 50 micron polypropylene string wound sediment cartridge to retain sand, rust and other suspended particles.
The second stage incorporates a polyphosphate cartridge designed to help limit the formation of limescale deposits in pipework, fittings and water-connected equipment.
Two Stages. Two Complementary Functions.
SEDIMENT · 50 μm
PP String Wound Cartridge
The string wound structure helps retain solid particles present in the water, including:
- Sand and mineral particles.
- Rust from pipework.
- Sediment and suspended solids.
- Particles within the cartridge's filtration rating.
POLYPHOSPHATE · ANTI-SCALE
Scale Inhibition Cartridge
Polyphosphates interact with scale-forming minerals, helping to limit their deposition on surfaces within the water installation.
- Helps prevent limescale build-up.
- Helps protect pipework and fittings.
- Helps reduce scale deposits in equipment.
- Complements the sediment filtration stage.
TWO-STAGE WATER TREATMENT
INLET WATER → PP 50 μm → POLYPHOSPHATE → TREATED WATER
Sediment retention + scale inhibition treatment
Designed for Water Installations
BRASS CONNECTIONS
1-inch threaded brass connections, suitable for installations requiring larger connection diameters.
PP + PET DOUBLE LAYER
Construction featuring a transparent PET inner layer and reinforced PP outer layer for additional structural protection.
INSPECTION WINDOWS
Allow visual inspection of the cartridge area through protective inspection covers.
UNIVERSAL CARTRIDGES
Compatible with standard 10-inch cartridges for convenient maintenance and replacement.
Reinforced Double-Layer Construction
Each housing features a structure made from two complementary materials:
INNER LAYER — PET: transparent material forming the inner surface of the housing.
OUTER LAYER — REINFORCED PP: high-strength outer structural layer.
Declared burst pressure resistance: >3.2 MPa
This value refers to housing burst resistance testing and must not be interpreted as the maximum continuous operating pressure.
Integrated Inspection Windows
Both housings feature inspection windows with hinged protective covers, allowing visual inspection without dismantling the filter housings.
Recommended Applications
A combined sediment filtration and scale inhibition solution for installations requiring particle retention and protection against limescale deposits.
Scale Inhibition Without Removing Hardness Minerals
Polyphosphates help limit the formation of limescale deposits but do not remove calcium or magnesium from the water. This system is therefore not a substitute for an ion-exchange water softener when a reduction in water hardness is required.
Easy Maintenance
TURN OFF WATER
Shut off the water supply before carrying out maintenance.
RELEASE PRESSURE
Loosen the pressure relief screw on the first filter head using a flat-head screwdriver and check that the system is depressurised.
OPEN HOUSINGS
Use the supplied housing wrench to unscrew the filter housings.
REPLACE & REASSEMBLE
Replace the cartridges when required, reassemble the housings and check for leaks.
Everything Needed for Installation
✓ 10" dual filter housing
✓ 50 micron PP string wound cartridge
✓ Polyphosphate cartridge
✓ White wall mounting bracket
✓ Housing wrench
✓ Integrated inspection windows
Technical Specifications
| FEATURE | SPECIFICATION |
|---|---|
| Brand | ROTEK FILTERS |
| System Type | 10" dual water filter |
| Filtration Stages | 2 |
| First Stage | 50 micron PP string wound sediment |
| Second Stage | Polyphosphate scale inhibitor |
| Connections | 1" BSP · Brass |
| Housing Construction | Reinforced PP + PET inner layer |
| Declared Burst Pressure Resistance | >3.2 MPa |
| Inspection Windows | 2 · With protective covers |
| Cartridge Compatibility | Universal 10" cartridges |
| Installation | Wall mounted · Bracket included |
| Maintenance | Removable housings with supplied wrench |
ROTEK FILTERS
WATER. BETTER. SIMPLER.
Ficha técnica
| Model | Water Filter |
| Compatible Model | Universal |