ROTEK PRESSURE Water Pre-Filter with Pressure Regulator, Gauge & 40 Micron 316 Stainless Steel Mesh
Referencia : FILAUTLPRESS
ROTEK PRESSURE combines sediment pre-filtration, pressure regulation and pressure monitoring in a single unit. Its washable 40-micron 316 stainless steel mesh helps capture sand, rust, dirt, sediment and other solid particles before they circulate through the water system.
The adjustable 1–8 bar pressure regulator allows the outlet pressure to be adapted to the requirements of the installation, while the integrated pressure gauge provides a clear visual reading. It features a brass body, a bottom flushing valve for easier maintenance and is available with a choice of 3/4” or 1” connection.
Precio : £ 46.72 £ 116.80
Más información
ROTEK PRESSURE – Water Pre-Filter with Pressure Regulator, Gauge & 316 Stainless Steel Mesh
ROTEK PRESSURE combines three key functions for protecting and controlling a water installation in a single unit: sediment filtration, pressure regulation and visual pressure monitoring.
Its washable 40-micron 316 stainless steel mesh helps capture sand, rust, dirt, sediment and other solid particles before they circulate through the water system. At the same time, the integrated pressure regulator allows the outlet pressure to be adjusted between 1 and 8 bar, while the pressure gauge provides an immediate visual reading.
FILTER · REGULATE · MONITOR
- 40-micron filtration: helps capture sand, rust, dirt, sediment and other solid particles.
- Adjustable pressure from 1 to 8 bar: allows the outlet pressure to be adapted to the requirements of the installation.
- Integrated pressure gauge: provides a clear visual pressure reading.
- 316 stainless steel mesh: washable and reusable.
- Brass body: robust and durable construction.
- Bottom flushing valve: facilitates the discharge of water and accumulated sediment.
- Choice of connection: available in 3/4” or 1”.
Filtration and Pressure Regulation in One Unit
The key difference between ROTEK PRESSURE and a conventional water pre-filter is its integrated adjustable pressure regulator.
In addition to providing a first barrier against solid particles in the water, it allows the outlet pressure to be regulated and checked directly using the integrated pressure gauge.
The 316 stainless steel mesh helps capture sediment and solid particles.
The integrated regulator allows the outlet pressure to be adjusted from 1 to 8 bar.
The pressure gauge provides a direct visual pressure reading.
3-IN-1 WATER CONTROL
A single unit combines sediment pre-filtration, pressure regulation and pressure monitoring, simplifying the protection and control of the water installation.
Adjustable Pressure Regulator · 1–8 Bar
ROTEK PRESSURE features an integrated pressure regulator with an adjustable range of 1 to 8 bar (0.1–0.8 MPa), allowing the outlet pressure to be adapted to the requirements of the installation.
The regulator reduces and controls the pressure supplied downstream, helping protect pipework, valves, taps, irrigation systems, appliances and other equipment connected to the water installation.
The selected outlet pressure will always depend on the pressure available at the inlet. The regulator is designed to reduce and control pressure, not increase it.
ADJUSTABLE PRESSURE · 1–8 BAR
Adjust the outlet pressure to suit the requirements of the installation and check it directly using the integrated pressure gauge.
Integrated 0–10 Bar Pressure Gauge
The integrated pressure gauge has a scale of up to 10 bar, providing a visual pressure reading while adjusting the regulator and during normal operation.
Pressure regulation and monitoring are therefore incorporated into the same unit, making both initial adjustment and subsequent checks straightforward.
VISUAL PRESSURE MONITORING
The integrated gauge provides a direct pressure reference without requiring a separate pressure gauge to be installed.
Washable 40-Micron 316 Stainless Steel Mesh
The filtration system uses a 40-micron 316 stainless steel mesh designed to help capture solid particles such as sand, rust, dirt and sediment present in the water.
The mesh is washable and reusable, reducing the need for frequent replacement of disposable filter cartridges.
40 MICRON
Sediment Filtration
Helps capture sand, rust, dirt and other solid particles.
316 STAINLESS STEEL
Washable & Reusable
No frequent replacement of disposable filter cartridges.
Easy Cleaning with Bottom Flushing Valve
Captured sediment can gradually accumulate in the lower section of the pre-filter. To simplify maintenance, ROTEK PRESSURE features a bottom flushing valve.
When sediment has accumulated, a suitable container can be placed beneath the outlet and the bottom valve opened to help discharge water and accumulated sediment.
The stainless steel filter mesh can also be cleaned when required to help maintain correct operation of the system.
EASY MAINTENANCE
The bottom valve allows accumulated sediment to be flushed out, while the stainless steel mesh can be washed and reused, reducing the need for replacement consumables.
Helps Protect the Water Installation
Sediment and unsuitable water pressure can affect different components within a water installation. ROTEK PRESSURE combines a first stage of sediment filtration with the ability to regulate the pressure supplied downstream.
Installed upstream of the equipment to be protected, it helps reduce the amount of solid particles entering the installation while allowing the outlet pressure to be adjusted to suit the system requirements.
Helps reduce incoming sediment while allowing the supplied pressure to be controlled.
Helps reduce the amount of sand, rust and other solid particles entering the equipment.
Provides a first filtration barrier before the water treatment equipment.
Helps capture particles while allowing the supplied pressure to be adapted to the system.
Brass Body & Robust Construction
The ROTEK PRESSURE body is manufactured from brass and combined with a 316 stainless steel filter mesh.
The transparent filter bowl makes it easier to visually check sediment accumulation and determine when maintenance may be required.
Its compact design combines filtration, pressure regulation and pressure monitoring in one unit, reducing the number of separate components required in the installation.
Operating Temperature · 10 to 70 °C
ROTEK PRESSURE is specified for operation with water at temperatures between 10 and 70 °C.
The specified maximum inlet pressure is 8 bar.
MAXIMUM INLET PRESSURE · 8 BAR
Specified maximum inlet pressure: 8 bar.
Adjustable outlet pressure range: 1–8 bar.
Choice of 3/4” or 1” Connection
ROTEK PRESSURE is available with two connection sizes to suit different water installations:
3/4” | 1”
Select the appropriate connection size for your installation before adding the product to your basket.
Key Features
Allows the outlet pressure to be regulated to suit the installation.
Direct visual pressure reading.
Washable and reusable filter mesh.
Helps discharge water and accumulated sediment.
ROTEK FILTERS Water Pre-Filter Range
The ROTEK FILTERS range allows you to select the most appropriate water pre-filter for each installation, from essential sediment protection to pressure monitoring and regulation, high flow and premium performance.
ROTEK PRESSURE is specifically designed for installations where, in addition to sediment filtration, it is necessary to regulate and monitor the water pressure.
Essential Protection
Reusable 40-micron filtration for essential sediment protection.
Pressure Monitoring
40-micron filtration with an integrated top pressure gauge.
High Flow
Up to 4,200 L/h with a front pressure gauge for installations requiring greater water flow.
Pressure Regulation
Filters sediment, regulates outlet pressure from 1 to 8 bar and provides visual pressure monitoring.
Premium Performance
8,000 L/h, 316 stainless steel mesh, front pressure gauge and semi-automatic centrifugal flushing.
Technical Specifications
Type: Water pre-filter with pressure regulator and gauge
Filtration method: Mechanical filtration
Filtration rating: 40 micron
Filter mesh: Washable 316 stainless steel
Pressure gauge: 0–10 bar
Maximum inlet pressure: 8 bar
Operating temperature: 10–70 °C
Connection: Choice of 3/4” or 1”
Cleaning: Bottom flushing valve
Power: Water pressure – no electricity required
Dimensions: approx. 250 × 150 × 50 mm
ROTEK PRESSURE · FILTER · REGULATE · MONITOR
40-micron 316 stainless steel mesh, adjustable 1–8 bar outlet pressure, integrated pressure gauge and a choice of 3/4” or 1” connection, combining sediment protection and pressure regulation in a single unit.
Ficha técnica
| Model | Water Filter |
| Compatible Model | Universal |