Double anti-lime, anti-corrosion and anti-incrustation kit for electric water heaters and heaters

Double anti-lime, anti-corrosion and anti-incrustation kit for electric water heaters and heaters. Double protection.

Kit formed by the perfect combination for the protection of electric water heaters and heaters with low flow against scale, the effects of lime and water corrosion.

Formed by:

Stainless steel filter 40 microns:

Small sediment filter with washable 40 micron stainless steel mesh. Able to eliminate any element suspended in water. Prevents incrustations caused by suspended elements that cause nodules with lime in the water. Protecting the point of use from breakdowns.

Characteristics:

•      Connection at one end 1/2" Female with movable nut and 1/2" Male at the other end
•      Constructed of robust materials: Stainless steel mesh filter, fine metal head and high pressure resistant polycarbonate cup.
•      Very compact, it takes up little space with measurements of 95mm * 44mm
•      Water treatment: Filtration at 40 microns. Able to retain any element suspended in water.
•      Easy and simple maintenance, easy disassembly and washable stainless filter.
•      Maximum operating pressure 8 bar.
•      Flow rate 900 l/h

Glass polyphosphate dispenser at the entrance of the electric water heater

Water filter to reduce limescale at the inlet of the electric water heater. It doses polyphosphates which is a lime sequestrant.

Ideal for preventing lime scale in the water from damaging any part of your boiler. Protecting the resistances.

Glass polyphosphate dispenser complete with suction tube, circular distributor and glass polyphosphate charger.

In addition to acting as lime sequestrants, polyphosphates create an invisible film inside the pipes that fulfills a protective function, preventing the precipitation of calcium and magnesium and thus preventing lime from adhering to the walls of the pipes themselves, consequently They contribute to extending the useful life of the appliances and facilities through which they pass.

Characteristics:

•      1/2" female steel connection.
•      Easy installation.
•      Maximum operating pressure 8 bar.
•      Maximum Temperature 40ºC.
•      Measurements 190 mm - 100 mm - 100 mm
•      500 g polyphosphate crystals
•      Plastic head and brass nut
•      Three routes, with the possibility of several installations
•      Made in Italy
•      Flow rate: 15 l/min = 900 l/h

Easy installation

Just unscrewing the connection hose and threading the assembly.